Unlimited WordPress themes, graphics, videos & courses! Unlimited asset downloads! From $16.50/m
Advertisement
  1. 3D & Motion Graphics
  2. 3D Studio Max

Modeling, Texturing & Rigging a Realistic Shark in 3D Studio Max - Part 3

by
Difficulty:IntermediateLength:LongLanguages:
This post is part of a series called Realistic Shark in 3D Studio Max.
Modeling, Texturing & Rigging a Realistic Shark in 3D Studio Max - Part 2

In the third and final part of the series, you'll learn how to construct a versatile and animation friendly rig for the shark using 3d Studio Max's built in tool-set. You'll learn how to create bone chains, link and parent objects, the importance of the child/parent relationship, how to setup control curves, and finally how to skin the model for proper deformation.


Additional Files:


1. Setting Up Layers

Step 1

Let’s start 3ds Max and open the Complete Textured Shark.max file, which we saved at the end of the second part of this tutorial.

3dsMax_Shark_PT3_13dsMax_Shark_PT3_13dsMax_Shark_PT3_1

Step 2

Now click on the Manage Layers button on the main toolbar, to open the Layer Manager window.

3dsMax_Shark_PT3_23dsMax_Shark_PT3_23dsMax_Shark_PT3_2

Step 3

Click on the Create New Layer button, to create a new layer inside the Layer Manager window.

3dsMax_Shark_PT3_33dsMax_Shark_PT3_33dsMax_Shark_PT3_3

Step 4

With the new layer selected, Right Click on it and then Rename it Body Mesh.

3dsMax_Shark_PT3_43dsMax_Shark_PT3_43dsMax_Shark_PT3_4

Step 5

Select the shark body in the viewport and then Right Click on the Body Mesh layer, and select the Add Selected Objects command from the fly-out menu. This adds the shark to the Body Mesh layer.

3dsMax_Shark_PT3_53dsMax_Shark_PT3_53dsMax_Shark_PT3_5

Step 6

Again click on the Create New Layer button to make another new layer, and Rename it Bones.

3dsMax_Shark_PT3_63dsMax_Shark_PT3_63dsMax_Shark_PT3_6

Step 7

Just like this, create Four more layers and Rename them as: Controls, Extra, EyeBalls and Teeth as shown in the image below.

3dsMax_Shark_PT3_73dsMax_Shark_PT3_73dsMax_Shark_PT3_7

Step 8

Now let’s add the relative objects to their corresponding layers. With both eyeballs selected in the viewport, Right Click on the EyeBalls layer and select the Add Selected Objects command from the flyout menu. This add the shark’s eyeballs to the EyeBalls layer.

3dsMax_Shark_PT3_83dsMax_Shark_PT3_83dsMax_Shark_PT3_8

Step 9

With the upper and lower teeth meshes selected, Right Click on the Teeth layer and select Add Selected Objects from the menu.

3dsMax_Shark_PT3_93dsMax_Shark_PT3_93dsMax_Shark_PT3_9

Step 10

Now turn on the Freeze button for the Body Mesh, EyeBalls and Teeth layers.

3dsMax_Shark_PT3_103dsMax_Shark_PT3_103dsMax_Shark_PT3_10

2. Creating the Bones

Step 1

Now we'll start creating bones. So first press the F3 key to change to wireframe view, and then go to the Animation menu and click on Bone Tools.

3dsMax_Shark_PT3_113dsMax_Shark_PT3_113dsMax_Shark_PT3_11

Step 2

This opens the Bone Tools window. Now click on the Create Bones button, to start creating bones.

3dsMax_Shark_PT3_123dsMax_Shark_PT3_123dsMax_Shark_PT3_12

Step 3

Jump into a side view and create a chain of eight bones in the middle of the shark body, as shown in the image below.

3dsMax_Shark_PT3_133dsMax_Shark_PT3_133dsMax_Shark_PT3_13

Step 4

You can always turn on Bone Edit Mode to edit the size, position and rotation of the bones.

3dsMax_Shark_PT3_143dsMax_Shark_PT3_143dsMax_Shark_PT3_14

Step 5

Again turn on the Create Bones button, and create two bones with the end bone node for the upper part of the fin.

3dsMax_Shark_PT3_153dsMax_Shark_PT3_153dsMax_Shark_PT3_15

Step 6

Following the same procedure, also create the tail bones.

3dsMax_Shark_PT3_163dsMax_Shark_PT3_163dsMax_Shark_PT3_16

Step 7

Just like this, create the head and jaw bones as shown in the image below.

3dsMax_Shark_PT3_173dsMax_Shark_PT3_173dsMax_Shark_PT3_17

Step 8

Following the same process, create the bone chain for one of the side fins as well. For this, work in the Top view.

3dsMax_Shark_PT3_183dsMax_Shark_PT3_183dsMax_Shark_PT3_18

Step 9

Now, jump into the Perspective view and see where the bones are actually placed. You will notice the side fin bones are not in the right place, they're actually a bit too high.

3dsMax_Shark_PT3_193dsMax_Shark_PT3_193dsMax_Shark_PT3_19

Step 10

So select the root of the side fin bones, and move it down to the side fin's mesh, as shown below.

3dsMax_Shark_PT3_203dsMax_Shark_PT3_203dsMax_Shark_PT3_20

Step 11

Now after placing the bone inside the fin mesh, select all the fin bones for mirroring and duplicating to the opposite side.

3dsMax_Shark_PT3_213dsMax_Shark_PT3_213dsMax_Shark_PT3_21

Step 12

With the fin bones selected, click on the Mirror button on the main tool bar to open the Mirror settings box. Here select the Y axis as the Mirror Axis, and change the Offset value to 55.0 (the Mirror Axis and Offset values could be different in your case). Next, turn On the Copy radio button, and then press OK to apply the mirror command. This will create the same bone chain for the opposite side's fin.

3dsMax_Shark_PT3_223dsMax_Shark_PT3_223dsMax_Shark_PT3_22

3. Renaming & Organizing the Bones

Step 1

Now we need to rename all the created bones according to their relative body parts. So with the first spine bone selected, rename it Spine01 jnt, under the Name and Color section of the Modifier panel.

3dsMax_Shark_PT3_233dsMax_Shark_PT3_233dsMax_Shark_PT3_23

In the same way, select the second spine bone and then rename it Spine02 jnt.

3dsMax_Shark_PT3_23a3dsMax_Shark_PT3_23a3dsMax_Shark_PT3_23a

Step 2

In this way, rename all the spine bones as Spine01 jnt, Spine02 jnt, Spine03 jnt, Spine04 jnt, Spine05 jnt, Spine06 jnt, Spine07 jnt, Spine08 jnt, and rename the very last end bone node Spine Tip jnt.

3dsMax_Shark_PT3_243dsMax_Shark_PT3_243dsMax_Shark_PT3_24

Step 3

Following the same process, rename all the tail bones as Back bottom fin 01 jnt, Back bottom fin 02 jnt and Back bottom fin Tip jnt.

3dsMax_Shark_PT3_253dsMax_Shark_PT3_253dsMax_Shark_PT3_25

Step 4

Now rename the top tail bones as Back Top Fin 01 jnt, Back Top Fin 02 jnt and Back Top Fin Tip jnt.

3dsMax_Shark_PT3_263dsMax_Shark_PT3_263dsMax_Shark_PT3_26
3dsMax_Shark_PT3_26a3dsMax_Shark_PT3_26a3dsMax_Shark_PT3_26a

Step 5

Next rename the top fin bones as Top Fin 01 jnt, Top Fin 02 jnt and Top Fin Tip jnt, as shown in the image below.

3dsMax_Shark_PT3_273dsMax_Shark_PT3_273dsMax_Shark_PT3_27

Step 6

So now we have renamed all the bones according to their corresponding body parts.

3dsMax_Shark_PT3_283dsMax_Shark_PT3_283dsMax_Shark_PT3_28

Step 7

If you want to see the names of the bones in a proper list, just click on the Select by Name button on the main toolbar, or press the H key on your keyboard.

3dsMax_Shark_PT3_293dsMax_Shark_PT3_293dsMax_Shark_PT3_29

This will open the Select From Scene window, where you can see all the bones listed.

3dsMax_Shark_PT3_29a3dsMax_Shark_PT3_29a3dsMax_Shark_PT3_29a

Step 8

After renaming the bones, click on the Layer Manager button to open the Layer Manager window once again. In the window, turn on the Hide button for the Body Mesh layer, to hide the layer object. This will hide the shark body mesh in the viewport.

3dsMax_Shark_PT3_303dsMax_Shark_PT3_303dsMax_Shark_PT3_30

4. Linking & Creating Helpers

Step 1

Now we'll start linking the bones with the relative bones. This is a tricky process and you must be able to understand the Child/Parent relationship. So first click on the Select and Link button on the main toolbar, and then click to select the Top Fin 01 jnt and then drag and drop onto the Spine02 jnt. Now the Spine02 jnt becomes the parent of the Top Fin 01 jnt. This means wherever the Spine02 jnt moves, the Top Fin 01 jnt will follow.

3dsMax_Shark_PT3_313dsMax_Shark_PT3_313dsMax_Shark_PT3_31

Step 2

Just like this, with the Select and Link tool selected, first click on and select the Back Top Fin 01 jnt and the Back bottom fin 01 jnt together, and then drag and drop onto the Spine Tip jnt.

3dsMax_Shark_PT3_323dsMax_Shark_PT3_323dsMax_Shark_PT3_32

Step 3

Now with the Select and Link tool selected again. First click on and select the Jaw jnt and then drag and drop onto the Head jnt, as shown in the image below.

3dsMax_Shark_PT3_333dsMax_Shark_PT3_333dsMax_Shark_PT3_33

Step 4

After parenting the bones, it’s time to link some more objects like the teeth and eyeballs meshes. So in the Layer Manager window, turn off the Freeze option for the Teeth and Eyeballs layers.

3dsMax_Shark_PT3_343dsMax_Shark_PT3_343dsMax_Shark_PT3_34

Step 5

After unfreezing the teeth and eyeballs meshes, use the Select and Link tool again. First click on and select both eyeballs, and then drag and drop on the Head jnt.

3dsMax_Shark_PT3_353dsMax_Shark_PT3_353dsMax_Shark_PT3_35

Step 6

Following the same process, select all the upper teeth meshes and link them with the Head jnt.

3dsMax_Shark_PT3_363dsMax_Shark_PT3_363dsMax_Shark_PT3_36

Step 7

Now select all the lower teeth meshes and link them with the Jaw jnt, to make it the parent of the lower teeth.

3dsMax_Shark_PT3_373dsMax_Shark_PT3_373dsMax_Shark_PT3_37

Step 8

Next we have to create the point helpers for linking the fins bones. So in the Create panel, click on the Helpers button and then select Point helper. Also turn on the Box checkbox, and keep the Size value as 2.0.

3dsMax_Shark_PT3_383dsMax_Shark_PT3_383dsMax_Shark_PT3_38

Step 9

Now drag and draw out Two point helpers anywhere in the viewport, as shown in the image.

3dsMax_Shark_PT3_393dsMax_Shark_PT3_393dsMax_Shark_PT3_39

Step 10

Now it’s time to align the helpers. So first select a helper in the viewport, and then turn on the Align button on the main toolbar (or you can press Alt-A alternatively.) Then click on the Left Front Fin 01 jnt as shown in the image.

3dsMax_Shark_PT3_403dsMax_Shark_PT3_403dsMax_Shark_PT3_40

Step 11

After clicking on the Left Front Fin 01 jnt, the Align Selection window opens. Here check on all X, Y and Z positions and also turn on all Align Orientation axes. Finally click on the OK button, to apply the align command.

3dsMax_Shark_PT3_413dsMax_Shark_PT3_413dsMax_Shark_PT3_41

Step 12

Following the same process, select the other point helper and press Alt-A (or the Align button), and then click on the Right Front 01 jnt, finally hit the OK button.

3dsMax_Shark_PT3_423dsMax_Shark_PT3_423dsMax_Shark_PT3_42

Step 13

Following the same process, I created one more point helper and kept the size larger than before. I have also aligned it with Spine01 jnt and then renamed all the point helpers as Left Fin Helper , Right Fin Helper and Root point helper as shown in the image below.

3dsMax_Shark_PT3_433dsMax_Shark_PT3_433dsMax_Shark_PT3_43

Step 14

With the Select and Link tool selected once again, link Left Front Fin 01 jnt to Left Fin Helper, Right Front 01 jnt to Right Fin Helper and Spine01 jnt to Root point helper, as shown in the following image.

3dsMax_Shark_PT3_443dsMax_Shark_PT3_443dsMax_Shark_PT3_44

Step 15

Now select both the Left Fin Helper and Right Fin Helper and then link them with the Root point helper.

3dsMax_Shark_PT3_453dsMax_Shark_PT3_453dsMax_Shark_PT3_45

Step 16

Finally, select the Spine01 jnt and Head jnt and then link them with the Root point helper.

3dsMax_Shark_PT3_463dsMax_Shark_PT3_463dsMax_Shark_PT3_46

Step 17

So now the Root point helper becomes the root parent of all the bones and helpers. You can check it by moving and rotating it.

3dsMax_Shark_PT3_473dsMax_Shark_PT3_473dsMax_Shark_PT3_47

5. Creating Control Curves

Step 1

Now we will create the control curves. So unhide the shark Body Mesh in the Layer Manager window.

3dsMax_Shark_PT3_483dsMax_Shark_PT3_483dsMax_Shark_PT3_48

Step 2

Go to the Create panel and select Circle from inside the Shapes tab, and then draw a circle onto the grid as shown.

3dsMax_Shark_PT3_493dsMax_Shark_PT3_493dsMax_Shark_PT3_49

Step 3

With the Circle shape selected, Right Click and select the Convert To: > Convert to Editable Spline option.

3dsMax_Shark_PT3_503dsMax_Shark_PT3_503dsMax_Shark_PT3_50

Step 4

With the Circle spline still selected, press the E key to select the Rotate tool and then Right Click on the Angle Snap Toggle button. This opens the Grid and Snap Settings window. Here keep the Angle value at 90.

3dsMax_Shark_PT3_513dsMax_Shark_PT3_513dsMax_Shark_PT3_51

Step 5

Turn on the Angle Snap Toggle button. Now with the Circle spline selected, go to the Modify panel and choose the Spline selection mode. Then while holding down the Shift key, Rotate the curve on the X axis to make a duplicate copy of the selected spline. You will notice that the duplicated spline snaps to 90 degrees, as shown in the image below.

3dsMax_Shark_PT3_523dsMax_Shark_PT3_523dsMax_Shark_PT3_52

Step 6

Following the same process, I duplicated the Circle once more on the Z axis and placed it as shown. I also turned on the Enable In Viewport option to see the curves with a solid thickness in the viewport. Keep the Thickness value at 0.4 or as you wish.

3dsMax_Shark_PT3_533dsMax_Shark_PT3_533dsMax_Shark_PT3_53

Step 7

Now duplicate the entire curve entity, and place each one at the top and bottom of the tail respectively.

3dsMax_Shark_PT3_543dsMax_Shark_PT3_543dsMax_Shark_PT3_54

Step 8

With any of the curve controls selected, make eight more copies of it. Place these controls beneath the spine bone chain according to each spine bone, as shown in the following image.

3dsMax_Shark_PT3_553dsMax_Shark_PT3_553dsMax_Shark_PT3_55

Step 9

Make two more copies of the curve entity and place them at the jaw and the mouth bones. Then create four new Circle splines and place two of them over each side fin, as shown.

3dsMax_Shark_PT3_563dsMax_Shark_PT3_563dsMax_Shark_PT3_56

Step 10

Once again open the Layer Manager window, and turn on the Hide button to hide the shark mesh.

3dsMax_Shark_PT3_573dsMax_Shark_PT3_573dsMax_Shark_PT3_57

Step 11

Now select all the control curves, do a Right Click, go to Convert To: and select the Convert to Editable Spline command from the fly out menu.

3dsMax_Shark_PT3_583dsMax_Shark_PT3_583dsMax_Shark_PT3_58


Step 12

Now with the top tail control curve selected, open the Hierarchy panel and turn on the Affect Pivot Only button. You will notice that the transform gizmo of the control curve is quite different and not following the alignment of the tail bone.

3dsMax_Shark_PT3_593dsMax_Shark_PT3_593dsMax_Shark_PT3_59

Step 13

So with the control curve selected and the Affect Pivot Only button enabled, click on the Align tool button on the main toolbar and then click on the Back Top Fin 01 jnt to open the Align Selection box. In the settings box, check on all the Align Position axes for X, Y, and Z. Also check on all the Align Orientation axes for X, Y, and Z, then click on the OK button.

3dsMax_Shark_PT3_603dsMax_Shark_PT3_603dsMax_Shark_PT3_60

Step 14

Following the same procedure, I have also aligned the other bottom tail control curve with the Back bottom fin 01 jnt. As we did previously, once we have aligned all the control's pivot points, we turn off the Affect Pivot Only button.

3dsMax_Shark_PT3_613dsMax_Shark_PT3_613dsMax_Shark_PT3_61

Step 15

Now select all the control curves and then while holding down the Alt key, do a Right Click and select the Freeze Transform command from the fly out menu.

3dsMax_Shark_PT3_623dsMax_Shark_PT3_623dsMax_Shark_PT3_62

Step 16

Whenever the Freeze Transform command is selected, a message box appears. Simply click on the Yes button to apply the Freeze Transform command.

3dsMax_Shark_PT3_633dsMax_Shark_PT3_633dsMax_Shark_PT3_63

Now let’s rename all the control curves one by one. First rename all of the spine controls as follows: Ctrl_Spn0, Ctrl_Spn01, Ctrl_Spn02, Ctrl_Spn03, Ctrl_Spn04, Ctrl_Spn05, Ctrl_Spn06, Ctrl_Spn07, Ctrl_Spn08. Rename all of the tail controls as Ctrl_tail Top01 and Ctrl_tail btm01 and the fin controls as Ctrl_Left Front Fin 01, Ctrl_Left Front Fin 02, Ctrl_Right Front Fin 01, and Ctrl_Right Front Fin 02. Finally rename the head and jaw controls as Ctrl_Head and Ctrl_Jaw respectively.

3dsMax_Shark_PT3_63a3dsMax_Shark_PT3_63a3dsMax_Shark_PT3_63a

Step 17

Now with all the control curves selected, open the Layer Manager. Select and Right Click on the Controls layer, and choose the Add Selected Objects option to add all the selected curves to this layer.

3dsMax_Shark_PT3_643dsMax_Shark_PT3_643dsMax_Shark_PT3_64

6. Applying Constraints

Step 1

Now we will apply particular constraints according to each control. So with the Back Top Fin 01 jnt selected, go to the Animation menu and select Orientation Constraint from inside the Constraints submenu.

3dsMax_Shark_PT3_653dsMax_Shark_PT3_653dsMax_Shark_PT3_65

Step 2

With the Orientation Constraint selected, click on Ctrl_tail Top01 to apply it.

3dsMax_Shark_PT3_663dsMax_Shark_PT3_663dsMax_Shark_PT3_66

Step 3

Now also apply the Orientation Constraint to the bottom tail control. So with the Back Bottom Fin 01 jnt selected, go to the Animation menu and select Orientation Constraint from inside the Constraints submenu, and then click on Ctrl_tail btm01 to apply the Orientation Constraint command to it.

3dsMax_Shark_PT3_673dsMax_Shark_PT3_673dsMax_Shark_PT3_67

Step 4

Following the same procedure, I have applied the Orientation Constraint to all the spine bones’ controls (From Ctrl_Spn01 to Ctrl_Spn08.)

3dsMax_Shark_PT3_683dsMax_Shark_PT3_683dsMax_Shark_PT3_68

Step 5

Just like this, apply an Orientation Constraint from the Left Front Fin 01 jnt to Ctrl_Left Front Fin 01, the Left Front Fin 02 jnt to Ctrl_Left Front Fin 02, the Right Front 01 jnt to Ctrl_Right Front Fin 01, and from the Right Front 02 jnt to Ctrl_Right Front Fin 02.

3dsMax_Shark_PT3_693dsMax_Shark_PT3_693dsMax_Shark_PT3_69

Step 6

Also apply an Orientation Constraint from the Head jnt to Ctrl_Head, and the Jaw jnt to Ctrl_Jaw.

3dsMax_Shark_PT3_703dsMax_Shark_PT3_703dsMax_Shark_PT3_70

7. Linking the Controllers

Step 1

Now we will link the controllers to each other. So with the Select and Link tool selected, link Ctrl_tail Top01 and Ctrl_tail btm01 to Ctrl_Spn08, Ctrl_Spn08 to Ctrl_Spn07, Ctrl_Spn07 to Ctrl_Spn06, Ctrl_Spn06 to Ctrl_Spn05, Ctrl_Spn05 to Ctrl_Spn04, Ctrl_Spn04 to Ctrl_Spn03, Ctrl_Spn03 to Ctrl_Spn02, and Ctrl_Spn02 to Ctrl_Spn01.

3dsMax_Shark_PT3_713dsMax_Shark_PT3_713dsMax_Shark_PT3_71

Step 2

Just like this, link Ctrl_Left Front Fin 01 to Ctrl_Left Front Fin 02, and Ctrl_Right Front Fin 01 to Ctrl_Right Front Fin 02.

3dsMax_Shark_PT3_723dsMax_Shark_PT3_723dsMax_Shark_PT3_72

Step 3

Finally, I created one big Rectangle spline around the shark's body, and aligned its gizmo to the Spine01 jnt by turning on Affect Pivot Only in the Hierarchy panel as we did in previous steps. In the Align Selection box, only turn on Align Position for all axes and then click on the OK button. Then rename it to Ctrl_global.

3dsMax_Shark_PT3_733dsMax_Shark_PT3_733dsMax_Shark_PT3_73

Step 4

Now we have to link all the root controls and the Root helper with Ctrl_global. So select all the root controls Ctrl_Spn01, Ctrl_Left Front Fin 01, Ctrl_Right Front Fin 01, Ctrl_Head, and Root point helper then turn on the Select and Link button and drag and drop on Ctrl_global.

3dsMax_Shark_PT3_743dsMax_Shark_PT3_743dsMax_Shark_PT3_74

Step 5

In this way we have now completed the rigging process.

3dsMax_Shark_PT3_753dsMax_Shark_PT3_753dsMax_Shark_PT3_75

8. Skinning the Mesh

Step 1

Now it’s time to apply skinning to the shark mesh. So I have unhidden the shark mesh to skin the bones.

3dsMax_Shark_PT3_763dsMax_Shark_PT3_763dsMax_Shark_PT3_76

Step 2

With the shark body mesh selected, go to the Modify panel and select the Unwrap UVW modifier in the stack.

3dsMax_Shark_PT3_773dsMax_Shark_PT3_773dsMax_Shark_PT3_77

Step 3

With the Unwrap UVW modifier selected, open the Modifier List and select the Skin modifier to apply it to the shark body mesh.

3dsMax_Shark_PT3_783dsMax_Shark_PT3_783dsMax_Shark_PT3_78

Step 4

After applying the Skin modifier, click on the Add button in the skin modifier Parameters group.

3dsMax_Shark_PT3_793dsMax_Shark_PT3_793dsMax_Shark_PT3_79

This opens the Select Bones window. Here choose Spine01 jnt, Spine02 jnt, Spine03 jnt, Spine04 jnt, Spine05 jnt, Spine06 jnt, Spine07 jnt, Spine08 jnt, Back Top Fin 01 jnt, Back Top Fin 02 jnt, Back bottom fin 01 jnt, Back bottom fin 02 jnt, Top Fin 01 jnt, Top Fin 02 jnt, Left Front Fin 01 jnt, Left Front Fin 02 jnt, Right Front 01 jnt, Right Front 02 jnt, Head jnt and Jaw jnt. Don’t select any ‘Tip’ bones in the list and then click on the Select button.

3dsMax_Shark_PT3_79a3dsMax_Shark_PT3_79a3dsMax_Shark_PT3_79a

Step 5

After applying the skin modifier and adding the bones, let’s check for proper deformation of the shark body.

3dsMax_Shark_PT3_803dsMax_Shark_PT3_803dsMax_Shark_PT3_80

If you rotate the head controller, you will notice some problems with the deformation.

3dsMax_Shark_PT3_80a3dsMax_Shark_PT3_80a3dsMax_Shark_PT3_80a

Step 6

Lets fix this problem. Select the Envelope inside the skin modifier, in the modifier list panel. Then first select the Head jnt and turn on the Edit Envelope button. You can see there isn`t a proper weight influence according to the selected head bone.

3dsMax_Shark_PT3_813dsMax_Shark_PT3_813dsMax_Shark_PT3_81

Step 7

To fix the problem, turn on the Vertices option.

3dsMax_Shark_PT3_823dsMax_Shark_PT3_823dsMax_Shark_PT3_82

Now with the upper lip vertices selected, increase the Abs Effect value to 1.0. You'll see the selected vertices are now shifted back to their original position properly.

3dsMax_Shark_PT3_82a3dsMax_Shark_PT3_82a3dsMax_Shark_PT3_82a

Step 8

Just like this, keep adjusting the Absolute Influence values to get proper deformation of the various parts of the shark mesh.

3dsMax_Shark_PT3_833dsMax_Shark_PT3_833dsMax_Shark_PT3_83

Step 9

We have now completed all the skin weights as required. You can check the deformation by moving and rotating various controls. Also apply a Mesh Smooth modifier to the shark body mesh to make it look smoother.

3dsMax_Shark_PT3_843dsMax_Shark_PT3_843dsMax_Shark_PT3_84

Step 10

Finally open the Layer Manager window, and Hide the Bones layer.

3dsMax_Shark_PT3_853dsMax_Shark_PT3_853dsMax_Shark_PT3_85

Now we have a fully rigged and animation ready shark character.

3dsMax_Shark_PT3_85a3dsMax_Shark_PT3_85a3dsMax_Shark_PT3_85a

Conclusion

Here I have composited a rendered image of the shark in Photoshop. I hope you have enjoyed this series.

3dsMax_Shark_PT3_85b3dsMax_Shark_PT3_85b3dsMax_Shark_PT3_85b

Advertisement
Advertisement
Looking for something to help kick start your next project?
Envato Market has a range of items for sale to help get you started.