In the second part of the tutorial series, I’ll show you how to model the pipeline of the fuel pump. I’ll show you how to model the T- shaped pipe and the pipe connector.
1. Creating the Pipeline
Open the fuel pump file in Maya which was saved in the previous part of the tutorial.
Create a cylinder with Subdivisions Axis as 14 and Subdivisions Cap as 2.
Place the cylinder on the base. With the cylinder selected, go to Show > Isolate Selected and turn on View Selected command to isolate the cylinder.
Press F11 key for the face selection mode. With the indicated bottom center faces selected, go to Edit Mesh > Extrude command.
Extrude the selected faces in Y axis. Delete the cap faces also.
Insert an edge loop using Insert Edge Loop Tool.
With the ring faces selected, go to Edit Mesh > Duplicate Face and click on its option box.
In the Duplicate Face Options window, turn on Separate duplicated faces check box. Click on Duplicate button to apply the settings.
Now you can see the duplicated and separated poly mesh.
Insert two edge loops by using Insert Edge Loop Tool. Press F9 key for vertex selection mode and then scale and edit the vertices as shown in the following image.
In this way, I have blocked the poly mesh for the bottom cap modeling.
Jump in the edge selection mode by pressing F10 key. With the top border edges selected, scale down as shown in the following image.
The bottom cap model is completed now.
2. Detailing the Pipe Connector
Go to Edit Mesh > Insert Edge Loop Tool and insert an edge loop as shown in the following image.
With the top ring faces selected, extrude those outwards a bit.
Insert two edge loops as shown in the following image.
With the top faces selected, extrude them up a bit.
Extrude the faces twice more and edit them as shown in the following image. Go to Show > Isolate Selected > View Selected and turn off the check box. It reveals the hidden object.
Continue extruding the pipe as per the height of the fuel pump object.
Keep extruding and bending to reach to the top of the fuel pump head as shown in the following image.
3. Creating the T-shape Pipe Splitter Model
Create a polygon cylinder in the side view with the settings as indicated in the image.
Jump in the top view and press 4 key for wireframe mode. Go to Create > CV Curve Tool and click on its option box.
In the Tool Settings window, turn on 1 Linear radio button.
With the CV Curve Tool selected, draw a bent curved line as shown in the following image.
Jump in the perspective view. With the curve line selected, put it around the center of the PolyCylinder.
With the cap faces of PolyCylinder and the curved line selected, go to Edit Mesh > Extrude and click on the option box.
In the Extrude Face Options window, keep Divisions as 6 and click on Extrude button to apply the command.
The extruded and bent pipe looks like this.
With the main pipe mesh selected, go to Edit Mesh > Insert Edge Loop Tool.
With the help of Insert Edge Loop Tool, insert two edge loops. With the indicated faces selected, go to Edit Mesh > Extrude and click on option settings box.
Extrude Face Options window, keep Divisions as 1 and click on Extrude button
to apply the Extrude command.
After applying extrude command, drag it up a bit in Z axis.
Following the same procedure, select the faces of the bent connector pipe and extrude.
Following the same process, extrude the faces of the other side of the pipe. With the extruded faces selected, go to Edit Mesh > Duplicate Face command to apply it.
It creates a separate and duplicate entity.
With the duplicated piece of mesh selected, press F9 key for vertex selection mode and then edit the vertices like a cap shape.
To add details, insert two edge loops and edit the vertices as shown in the image.
Insert two edge loops at the end edit the shape as shown in the following image.
Put this cap model at the end of the pipe as if it is conjoining the pipe to the main body of the fuel pump.
For making hard corner surface, insert the supporting edge loops around the corner edges.
Insert the supporting edges at each corner surface of the mesh.
In this way, the modeling of this section is completed.
The modeling of the top part of the pipe is also completed.
This completes the pipe line of the model so far. The pipe line is not 100% vertical to the base. I have deliberately made it a bit bent at some angles so that it may look rough and more realistic.
In the next part of the tutorial, I’ll model the under-section pipe channels of the fuel pump.
Envato Tuts+ tutorials are translated into other languages by our community members—you can be involved too!Translate this post